地域

Close menu

HFP01SC

Self-calibrating heat flux sensor

HFP01SC self-calibrating heat flux sensor™ is a heat flux sensor for use in the soil. It offers the best available accuracy and quality assurance of the measurement. The on-line self-test verifies the stable performance and good thermal contact of sensors that are buried and cannot be visually inspected and taken to the laboratory for recalibration. The self-test also includes self-calibration which compensates for measurement errors caused by the thermal conductivity of the surrounding soil (which varies with soil moisture content), for sensor non-stability and for temperature dependence.

詳細はこちら
仕様
計測項目
  • 熱流
計測範囲
  • -2000 to +2000 W/m²
感度 (典型値)
  • 60 x 10⁻⁶ V/(W/m²)
全仕様
製品についてのご質問

問い合わせ

仕様

計測項目
  • 熱流
計測範囲
  • -2000 to +2000 W/m²
感度 (典型値)
  • 60 x 10⁻⁶ V/(W/m²)
On-line functionality testing
  • self-test including self-calibration
検知エリア
  • 8 x 10⁻⁴ m²
センサ熱抵抗
  • 81 x 10⁻⁴ K/(W/m²)
動作温度範囲
  • -30 to +70 °C
防水性
  • IP67
Film heater resistance
  • 100 Ω ± 10 %
Film heater rated power supply
  • 9 to 15 VDC
Interval between self-tests
  • 6 hr
Heating interval duration
  • 180 s
Power consumption daily average
  • 0.02 W
標準ケーブル長
  • 2 x 5 m
オプション
  • ケーブル延長 (10, 15, 20, 30, 40 m), 「黒」BLK-80 ステッカー,「金」GLD-80 ステッカー
オプション
  • longer cable length (2 x 10, 15, 20, 30, 40 m)
マニュアル & ダウンロード
HFP01SC カタログ
HFP01SC マニュアル

詳細

HFP01SC measures soil heat flux in W/m²

HFP01SC measures soil heat flux in W/m². It is used when the highest level of quality assurance and a high measurement accuracy are required. In essence, HFP01SC is a combination of a heat flux sensor and a film heater. The heat flux sensor output is a voltage signal that is proportional heat flux through the sensor. At a regular interval the film heater is activated to perform a self-test (see figure 4). The self-test results in a verification of sensor contact to the soil and in a new sensitivity that is valid for the circumstances at that moment. The latter is called self-calibration. Implicitly also cable connection, data acquisition and data processing are tested. The result is a much improved accuracy & quality assurance of the measurement relative to measurements with conventional sensors such as model HFP01.

Unique features and benefits

  • low thermal resistance
  • large guard area (required by the ISO 9869 standard)
  • low electrical resistance (low pickup of electrical noise)
  • high sensitivity (good signal to noise ratio in low-flux environments)
  • robustness, including a strong cable (essential for permanently installed sensors)
  • IP protection class: IP67 (essential for outdoor application)
  • incorporated film heater for self-testing

推奨用途

  • high-accuracy scientific measurement of soil heat flux, with a high level of data quality assurance
HFP01SC
HFP01SC
  • low thermal resistance
  • large guard area (required by the ISO 9869 standard)
  • low electrical resistance (low pickup of electrical noise)
  • high sensitivity (good signal to noise ratio in low-flux environments)
  • robustness, including a strong cable (essential for permanently installed sensors)
  • IP protection class: IP67 (essential for outdoor application)
  • incorporated film heater for self-testing
製品についてのご質問

問い合わせ